Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discreet and does not have LED indicators or key fobs, and is concealed in the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting their vehicle. This guide will guide you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system links directly to your vehicle's ECU and is secured by a unique PIN code of your choice. It's undetectable to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits, the installer must first disconnect your battery. After the battery has been disconnected, the installer may safely begin working. Basic hand tools can be used to make precise connections. A multimeter is useful to verify electrical values. Cable tie and insulation tape are vital to secure connections and keep wiring tidy. Lastly, the user manual gives specific guidelines that are specific to your Ghost Immobiliser model.
It is crucial to select the right grounding spot that is free of dirt or paint during installation. The installer should be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be plugged into or soldered depending on the model. To ensure a reliable and durable connection, it is recommended that you use a high-quality plug.
Once the installation is complete Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows valet parking or mechanics to use the vehicle without having to know the pin code. To accomplish this, the customer has to hit the button for service on the dashboard 5 times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a great choice for those who rent out their vehicles regularly on platforms like Turo. An immobiliser can lower insurance costs since it reduces the likelihood of theft.
Getting Started
If you are seeking a solution to safeguard your vehicle from theft it is best to go with an autowatch ghost immobiliser . The device protects your vehicle from being started if a criminal steals or copies the key. This is due to its high-tech technology, which is designed to prevent the car's engine from starting without the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence that only you know and makes it impossible for others to start your vehicle. This is the best way to safeguard your pride and joy. It will ensure that your car's value remains intact if you ever want to sell it.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical issues and system malfunctions. You'll need to locate a power supply of 12V and a good grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure a secure connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to prevent electrical short circuits.
Once the wires are connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. After you've confirmed that everything is working properly then you can put the immobiliser in a secure place inside the vehicle. Make sure to cover it in a secure manner to ensure that thieves cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it meets the highest standards of security and is a fantastic deterrent to car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. The device is easy to use, and can be set into an option for a service valet so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus and communicates with the ECU, making it a virtually undetectable addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with your vehicle's factory settings.
The system is also undetectable by thieves using scanners for diagnostics. The system does not send or receive radio frequency signals, but instead uses CAN data for communication with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To make use of the Ghost Immobiliser simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser safeguards your vehicle against key cloning or hacking while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you have to hand your car to service or valet parking.
You'll require a continuous power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and able to be touched. It is also recommended to use cable ties to tie and secure the wires, as this will decrease the chance of being tampered with by thieves. To avoid mistakes, make sure to double-check these points and mark them with labels or tape. Verify all connections for signs that they are wearing out. Connections that are loose can cause malfunctions in the system, so make certain that they are securely in place and properly insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit functions properly, and that all connections are safe and well-insulated. If you encounter any issues, be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that seamlessly into your car's ECU to stop the engine from starting without authorization. Its innovative technology protects your car from key cloning, hacking, and other common tactics that thieves employ to steal cars. The Ghost also works in tandem with existing alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features, paired with its secluded design makes it a preferred choice for drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation to ensure proper integration of Ghost Immobiliser. A good starting point is to refer to the vehicle's wiring diagram, which will serve as a guideline for locating and connecting the wires required. Then, you'll need to identify the power source and grounding points. Once you've identified these then you'll be required to mark them so that they're easy to identify during the installation process. It is also important to use top-quality tools and materials. Basic hand tools can assist you in making precise connections. A multimeter will verify electrical values, and also ensure safety. Cable ties and insulation tape will help keep all connections tidy and neat. Also, a user's guide will provide specific instructions tailored to your Ghost model.
Before you begin installing, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser functions as intended and will stop vehicle starts that are not authorized. It's recommended to perform this procedure regularly as part of your routine inspections of the vehicle to ensure the system is operating correctly.
Once the installation is complete After the installation is completed, you are able to drive your car with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that nobody is able to escape with your car without the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempt to steal or tamper that could lead to the location of your vehicle if it is stolen.
The Ghost is compatible with a variety of automobiles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This assures customers, insurance companies and law enforcement agencies that all installations are completed safely and in a correct manner.